Gears

HARDENED 18T PINION GEAR 32P

Hardened 32P Absolute Pinion, 18TOverviewExtra-hard 32 pitch pinions are a must for use with our steel spur gears and will last and last with plastic spur gears. Pinion is stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch...

HARD 48 PITCH MACHINED 24T PINION 5M/M BORE

48 Pitch Pinion Gear, 24T

EXTRA HARD 22 TOOTH BLACKENED STEEL 32P PINION 5M/M

Extra Hard 22 Tooth Blackened Steel 32p Pinion, 5mmOverview Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the...

21T PINION GEAR 48P

48 Pitch Pinion Gear, 21TOverviewThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16...

21T 48P ALUM PRO PINION

48P Hard Coated Aluminum Pinion Gear, 21TOverviewThe "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black anodize. Recommended for onroad, but they can be run off road. Pinions are...

19T PINION GEAR 32P

32P Alloy Pinion Gear, 19TOverview32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinions are not stamped with tooth...

X-Hard/Wide 48p Motorgear 15T Size 1/8 3m s/s

X-Hard Wide 48p Motorgear 15T 1/8

HARD NICKEL PLATED 48 PITCH PINION 37 TEETH

Nickel-Plated 48 Pitch Pinion Gear, 37T

X HARD 5mm (1.0 MOD) PINION 20

Extra Hard Steel 5mm Bore 1 Module Pinion, 20TOverviewExtra Hard Steel 5mm Bore (1.0 module) Brushless Motor Pinions. One 4x4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. These...

HARD COATED ALUMINUM 48P PINION 36 TEETH

48P Aluminum Pinion, 36T

20T PINION GEAR 48P

48 Pitch Pinion Gear, 20TOverviewThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16...

HARD 48 PITCH MACHINED 23T PINION 5MM BORE

48 Pitch Machined Pinion, 23TOverview5mm bore

EXTRA HARD 21 TOOTH BLACKENED STEEL 32P PINION 5M/M

Extra Hard 21 Tooth Blackened Steel 32p Pinion, 5mmOverview Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the...

18T PINION GEAR 32P

32P Alloy Pinion Gear, 18TOverview32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinions are not stamped with tooth...

HARDENED 17T PINION GEAR 32P

Hardened 32P Absolute Pinion, 17TOverviewExtra-hard 32 pitch pinions are a must for use with our steel spur gears and will last and last with plastic spur gears. Pinion is stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch...