Gears

19T ABSOLUTE PINION 48P

48P Absolute Pinion, 19TOverviewSuper hard Absolute steel pinions gears are a must for running with steel spur gears or will last and last if run with a plastic spur gear. Tooth number stamped on each pinion. 1/8 inch bore. One 5-40 set screw included...

HARDENED 22T PINION GEAR 32P

Hardened 32P Absolute Pinion, 22TOverviewExtra-hard 32 pitch pinions are a must for use with our steel spur gears and will last and last with plastic spur gears. Pinion is stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch...

HARD 48 PITCH MACHINED 28T PINION 5M/M BORE

48 Pitch Pinion Gear Hard, 28T

EXTRA HARD 26 TOOTH BLACKENED STEEL 32P PINION 5M/M

Extra Hard 26 Tooth Blackened Steel 32p Pinion, 5mmOverview Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the...

Arrma Infraction 5mm, 26T Speed Pinion Gear, MOD 1

5mm Speed Pinion MOD 1, 26T: Infraction

HARD COATED ALUMINUM 48P PINION 40 TEETH

48P Aluminum Pinion, 40T

Extra Hard 11T 32P Blackened Steel Pinion Gear, 5mm Shaft

Extra Hard 11 Tooth Blackened Steel 32p Pinion, 5mmOverview Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the...

EXTRA HARD 5MM BORE (1.0 MODULE) PINION 23 TEETH

Extra Hard Steel 5mm Bore 1 Module Pinion, 23T

HARDENED 21T PINION GEAR 32P

Hardened 32P Absolute Pinion, 21TOverviewExtra-hard 32 pitch pinions are a must for use with our steel spur gears and will last and last with plastic spur gears. Pinion is stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch...

HARD 48 PITCH MACHINED 27T PINION 5MM BORE

48 Pitch Machined Pinion, 27TOverview5mm bore

18T ABSOLUTE PINION 48P

48P Absolute Pinion, 18TOverviewSuper hard Absolute steel pinions gears are a must for running with steel spur gears or will last and last if run with a plastic spur gear. Tooth number stamped on each pinion. 1/8 inch bore. One 5-40 set screw included...

Black Steel, 56T Stock Replace

Steel 56T Stock Repl 32P Gear Black SCX10 SMT10

Hard Coated Aluminum Pinion Gear 48P 39 Teeth

48P Hard Coated Aluminum Pinion Gear, 39TOverviewThe "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black anodize. Recommended for onroad, but they can be run off road. Pinions (14...

72T HARDEND STEEL SPUR GEAR

Steel Spur Gear, 72T: NRU, TMXOverviewRRP Steel T-Maxx / 2.5 Maxx 72t Spur Gear is precision machined and hardened. This spur takes the stock friction pegs (TRA4685) for best performance use 12 new pegs.

EXTRA HARD 5M/M BORE (1.0 MODULE) PINION 22 TEETH

Extra Hard Steel 5mm Bore 1 Module Pinion, 22T