Tamiya

RC 5x5mm Alum Ball Connector

Use to adjust position of upper arm on competition-ready R/C chassis. Length from bearing surface to ball connector has been reduced from 5mm to 4mm, to increase setting range. Made from high durability aluminum. Hex head holes ensure screws are securely...

RC TRF421 A Parts, Upper Arms

TRF421 A Parts Upper Arms .mediaFeature {padding:2px 0;} .aligncenter { text-align: center; } Overview Spare upper arm parts for use on the TRF421 chassis.

RC 22mm Low Friction Sus Shaft

These shafts are used in place of 3x22mm screw pins and ensure secure attachment thanks to E-rings. The shaft also features a low-friction coating for smoother suspension movement.Features:Low-Friction Shaft x 4E-rings includedCompatible Chassis: TT-01,...

RC TT02 Aluminum R Upright 2.5 Degrees

These uprights are for the TT-02 chassis that allows you to alter the toe of your machine, a vital set-up feature that governs steering response.Attaching these uprights in place of the kit standard resin parts (A11) alters the toe angle from 0 degree at...

CLAMP TYPE ALU WHEEL HUB

These are 5mm wheel hubs used in many of Tamiya's RC on-road cars. They replace the standard plastic hub found in stock kits. A slit is provided in the wheel hub, and the gap is tightened with a cap screw. This method of attachment more securely fixes...

RC M-08 Concept Gears, Spur/Counter/Idler

This is a spare gear set for the M-08 chassis. Keep your M-08 Concept RWD chassis in peak, smooth-running condition by changing out worn gears with these spare parts.*Denotes shared design with M-07 Concept.Includes:M-08 Concept Spur Gear...

UNIV SHAFT ASSEMBLY

Compared to a standard axle/dog bone drive shaft, a universal shaft reduces power loss caused by friction during steering.

RC TT02 Carbon Bumper Support

This is a carbon fiber bumper support for the TT-02 touring car chassis. Using this piece will reduce chassis weight and boost its durability at the same.Compatible Chassis:TT-02, TT-02D, TT-02 Type-S, TT-01 Type-E, TT-01 Type-ES & TT-01D Type-E Chassis

RC Reinforced Swing Shaft Caps

This component (swing shaft blades) is for use with the direct cup parts in Item 54879 TRF419 Aluminum Front Direct Cups. (Also included with the Cup Kit Option parts) It has an updated design and material from previous incarnations for more durability...

ON-ROAD SPRING

Fine-tune your dampers with the four types of spring in this set!Includes two each of soft (red), medium (yellow), hard (blue) and extra-hard (white) springs.Compatible ChassisF104*2, F104W*2, F104 PRO II, FF-03, FF-03 PRO, FF-04 EVO, M-07 Concept, TA05...

RC M-07 Concept A Parts Tree, Body Mounts

Features:M-07 Concept A Parts x2Contains spares to replace parts on 1 chassis.Compatible with M-07 Concept chassis cars.M-07 Concept A Parts x2Contains spares to replace parts on 1 chassis.Compatible with M-07 Concept chassis cars.

RC Aluminum Turnbuckle Shaft 3X42Mm (2pcs)

RC Aluminum Turnbuckle Shaft 3X42Mm (2pcs)

RC On Road Racing Truck Tires, For MAN Race Trucks

1/10 On Road Racing Truck Front/Rear Tires (2)Key Features High sidewalls give a realistic look High sidewalls provide gentler handling great choice for less experienced drivers Compatible with on road racing truck models on TT-01 Type-E or...

RC TT02 Aluminum Propeller Shaft

Aluminum Propeller Shaft: TT-02

G Parts for TT-01, Gear Bag w/ Spur and Differential Gears

G Parts: TT-01