Team Associated

Team Associated - FT Aluminum Clamping Servo Horn 25T, 20mm

These 7075 T6 aluminum clamping servo horns are for 1:10 scale touring cars. Included is a large M2.5 screw and is laser-etched with a spline size for positive identification. A length of 20.0mm provides a smoother steering response.

FT Ring and Pinion Set, for Enduro SE, Machined

This Factory Team set for the Enduro SE vehicles provides machined ring and pinion gears for precise mesh fit, and both are made of steel for increased durability.The six mounting screw holes add another level of durability, and the included Golden...

Enduro Axle Kit

With its extruded aluminum center section, universal front drive axles, and hardened steel ring and pinion gears, delivering useful power will not be an issue with the Enduro axle.#42077 contents: qty 1 Assembly instructions qty 1 CR10 Axle Housing qty 2...

Enduro Pivot Balls, Steel

Steel Pivot Balls, 1/10 Element Enduro Introduction Enduro, Enduro Gatekeeper Rock Crawler/Trail Truck, Enduro Trail Truck, Enduro Trail Truck, Knightrunner, Enduro Trail Truck, Knightrunner, blue, #42034 - Stealth(R) X Gearbox

Octalock Spur Gear, 87 Tooth, 48 Pitch

The Octalock spur gears, launched with the RC10B74.1 buggy, feature an octagon slipper pad shape, with eight locking tabs that engage with the pad for maximum security and longevity. This 87T was released per requests from the drag racing community.

RC10B7 Chassis, -4mm

A new chassis length option is now available from Team Associated for the RC10B7 and RC10B7D. This chassis is a good tuning option for further wheelbase tuning. The short chassis generally provides better rotation and more forward bite, which is...

RC10B7 Factory Team Battery Mount Set

Factory Team Battery Mount Set now available for the RC10B7! This set replaces the plastic kit parts with carbon fiber and blue anodized aluminum for a factory look. Screen-printed markings clearly show battery positions and offset direction. Both...

RC10B7 Factory Team Anti-Roll Bar Mount

The Aluminum Anti-Roll Bar Mount utilizes a smooth plastic bushing that allows for smooth rotation of the Anti-Roll Bar in the durable aluminum mount.

RC10B7 FT One-Piece Servo Mount, Black Aluminum

Add some bling while further improving the durability of your RC10B7 with the 7075-T6 one-piece Servo Mounts, Motor Mounts, and +2mm Ballstud Mounts.These parts are available anodized blue or black with secondary machined chamfers and laser-etched FT...

RC10B7 FT Rear Hub Set, HRC, Black

Factory Team aluminum hubs for the RC10B7. These hubs are a more durable alternative to the molded hubs and provide more unsprung weight, which can be used as a tuning option. The HRC (High Roll Center) hubs include the secondary bearing bore for the...

RC10B7 FT Rear Hub Set, HRC, Blue

Factory Team aluminum hubs for the RC10B7. These hubs are a more durable alternative to the molded hubs and provide more unsprung weight, which can be used as a tuning option. The HRC (High Roll Center) hubs include the secondary bearing bore for the...

RC10B7 FT Carbon Fiber Servo Weight Plate, 4g

Further dial in the weight bias of your RC10B7 and RC10B7D using these new weight options from Factory Team. These plates are a direct fit to the RC10B7 platform.

B6 Brass Under Battery Weights

The B6 battery weights fit perfectly under your shorty LiPo batteries so that you can add weight while reducing your vehicle's center of gravity, resulting in improved handling and stability on high-grip surfaces. Each 3.74" x 2.08" brass set contains...

B6 Aluminum Steering Rack

Factory Team Aluminum Steering Rack, 1/10 Team Associated RC10B6 Introduction B44, B44.3, DR10, DR10M, GT2, Pro2 DK10SW, Pro2 LT10SW, Pro2 SC10, ProRally, ProSC10, RB10, RC10, RC10 Classic, RC10 World's Car, RC10B2, RC10B3, RC10B4, RC10B4.1, RC10B4.2,...

FT 3X23 Shock Shaft V2, Chrome

Factory Team 3X23 Shock Shafts (2), V2, Chrome